CYGNUS CYCLONE 30 FC

Overview
Equipment
Basic package
Photos
Layout

Overview

The Cygnus Cyclone 30 FC (Forward Control) has a wheelhouse with the bridge windows inclined to the forward. The wheelhouse gives good shelter for four persons. The top of the wheelhouse can be extended to divert sprays and give additional shelter from the rain. The length of the overhang can be varied to customers needs.
With the FC wheelhouse, there is huge deck space available to fit fishing gear, providing space for angling and or diving operations. This gives us the opportunity to satisfy the needs of both the professional seaman and the recreational sailor. The Cygnus Cyclone 30 FC can be delivered at any stage of completion.

Technical data

Dimensions

Dimensions	Metric	Imperial
Length Overall	9.15m	30 ft
Beam	3.35m	11 ft
Draft	0.9m	3.2 ft
Air draft (Waterline to top of mast)	3.00 m	9.84 ft
Displacement *	3.5 tons –5.5 tons
Berths (Depending engine weight/interior layout)	2- 4 or 6

Performance

Performance	Metric	Imperial
Engine recommendation (Single)	330 - 400 HP / 246 – 298 KW
Engine recommendation (Twin)	2 x 225-300 HP / 2 x 168 - 224 KW
Top Speed Range	55 km/h – 74 km/h	30 - 40 knots
Fuel consumption (25 knots)	2.20 l/nm	0.484 Gal/nm
Maximum cruising range/time	180 nm – 454 nm	7 hrs – 18 hrs
Maximum load	1500 kg	3307 Pounds
CE category	B-offshore (CE)	B-offshore (CE)

Capacities

Capacities	Metric	Imperial
Fuel tank	400 – 1000 litres	88 – 220 Gallons
Water Capacity	100 – 250 litres	22 – 55 Gallons
Septic Tank	40 – 110 litres	8.8 – 24.2 Gallons
Battery	3 x 100 AH - 12 V/24 V

Equipment

Features

HULL DESIGN
Stability with deep vertical shines.

HIGH SPEED
Speed, planning hull.

LARGE DECK
Large flush working deck

STRONG CONSTRUCTION
Solid and high quality materials

ELECTRONICS
As per customer requirements

FISHING GEAR
Custom made fishing gear

Basic package

Heavy duty Cyclone 30 FC to colour of customer’s choice.
Engine: Iveco N67 280 marine engine driving through a PRM1000 Marine gearbox.
Engine cooling system via through hull seacock and quality raw water filter system.
Engine instrumentation and controls mounted in wheelhouse
Electrics supplied by single heavy-duty 12volt battery via heavy duty Vetus isolation switch wired to 5-gang switch panel in wheelhouse.
Converters 300 and 1200 W Victron
Four bladed bronze propeller on a 45mm 316 Stainless Steel propeller shaft.
Stainless Steel rudder and rudder support skeg with bearing connected with Vetus Hydraulic steering system with Stainless Steel steering wheel.
650lt Aluminium Fuel tank complete with filler through deck or on Gunwale connected to engine via quality pre fuel filter system.
Fully enclosed FC wheelhouse finished in white Gel coat and fitted with aluminium framed marine windows and wheelhouse door. Sill height 300 mm. Window are clear glass.
Standard Cyclone flush deck with full size deck hatch (coaming height 300mm) over engine finished in light grey non-slip deck paint.
Emergency bilge pump: Single Jabsco water puppy bilge pump fitted in engine room controlled from wheelhouse through an on/off/auto switch.
Two disc anodes fitted to rudder and 1 x large hull anode fitted and wired as necessary.
All round D-Fendering fitted at joint of Gunwale and hull
Name of vessel on bow x 2 and on the stern of the vessel.
Hull anti fouled with one layer of anti-fouling under waterline complete with boot top stripe.
Navigation lights
One deck light.
Deck hardware to include 1 x heavy-duty bow bollard and 2 x stern bollards, all stainless steel.