140,000 Pounds Sterling
Cygnus Cyclone 35. Equipped for potting. The rigid new model Cygnus Cyclone is a well proven vessel. Delivered to the owner as a part built and completed by himself to the highest standard. The Cygnus Cyclone is renowned for its stability with the over pronounced vertical chines.
|Pressurised Hot/Cold Water:||No||Other (Please State)|
|Make:||Cygnus||Vessel Reference:||CY 0003|
|Model:||Cyclone Cyclone 35 FC||Number of Engines:||1|
|LOA:||10.73 Metres||35.0 Feet||HP (each):||450|
|LWL:||10.00 Metres||30.8 Feet||Fuel Type:||Diesel|
|Beam:||3.80 Metres||12.5 Feet||Hull Material||GRP|
|Draft:||1.10 Metres||3.6Feet||Displacement:||8000 Kg|
|Build Year:||2012||Hull Type:||Semi-displacement|
The forward cabin is painted in flow coat for easy maintenance. The forward cabin is used for storage only. There are no bunks. However, when needed these can be easily fitted.
The wheelhouse with large dashboard and all modern electronics fitted. Small electronics are fitted in an overhead console. The steering wheel and helm seat is to the starboard side. There is a pilot seat to port side. Steering is hydraulic with all pipes in stainless steel. The aluminium framed windows provide a good 360 degrees all around view. The starboard side aft window and the window in the back bulkhead can slide open for ventilation. The wheelhouse door is offset to starboard side. There is a large aft overhang at the wheelhouse to protect against the elements. Stainless steel handrails are fitted on the wheelhouse. The radar mast is custom made and from stainless steel.
|Engine Make & Model:||IVECO C9 CURSOR||Battery System:||24V|
|Gearbox Make & Model:||TWIN DISC 5061A||Power Generators:||Nil|
|Drive Configuration:||Shaft drive||Genset:||No|
|Engine Hours:||1600||Genset Model:||No|
|Last serviced:||Every 300 Hrs||Shore Power:||Yes|
|Propeller type:||5 blade||Battery Charger:||Yes|
Iveco Cursor C9 engine de-rated to 450 HP and built in 2012. Engine serviced every 300 hours. Stainless exhaust pipe with water trap muffler box. Propeller 5 blade. Speed: giving 23 knots.
Max Sea twin screen plotter, Furuno Navnet Radar/Plotter. Furuno 10" sounder. Furuno pilot GPS and VHF.
4 x 24 Volt Heavy duty batteries and isolator switch. Heater in wheelhouse. Deck working lights and fishing lights fitted. Switchboard in wheelhouse.
2 x dry powder hand held fire extinguishers.
Auto extinguisher system in engine compartment.
2 x auto electric bilge pumps: 2 x manual bilge pumps.
4 Man liferaft.
3 x Exalto 2 speed wipers fitted to wheelhouse windows.
Deck & General
Boat is rigged for potting. Aft of the wheelhouse to starboard is de horizontally placed hydraulic pot hauler, david, gunwale roller and secondary controls. Railings and cat catcher fitted. The gunwale to starboard aft of the roller and the hull under the roller are protected with stainless steel protection plates. A large flush deck is fitted with scupper ports in the aft. The fish hold is double with two access hatches that can be screwed down. Stainless steel gunwale roller and 1'5 ton Spencer Carter hauler. Self-shooting via stern door. Hydraulics with tandem pump and clutch running off engine gearbox hard pumped in stainless pipe. Two (2) fish rooms to aft of wheelhouse with hatches. 750 litres for dorsal tank with racer filter.
Boat is in very good condition and well maintained. Reason for selling is that I work alone and prefer a smaller boat with the same set up lie a Cygnus Cyclone 30. The boat currently does not have a Seafish certificate.
This vessel can be viewed in the Jersey. The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.